Introducing UltraGauge+ 3

The UltraGauge+ is an excellent choice for non-destructive, in-process wall-thickness measurement across a number of manufacturing applications, including hose, medical tubing, pipe, cable, and many kinds of extruded tubing. Combined with LaserLinc's laser scan micrometers, a system can monitor and control the OD, ID and the wall thickness for one, two, or more layers.

Product types and wall thickness ranges measurable by the UltraGauge+
Material	Size Range	Notes

Plastics	001" – 1.0" (.025mm – 25mm)	For some plastics such as Teflon, the UltraGauge+ can measure product as small as 0.0005"/.0127mm.


Rubber	.001" – 1.0" (.025mm – 25mm)


Glass Tubing	See Note	Dependent on material type and wall thickness.

Metal Tubing	See Note	Dependent on material type and wall thickness.

The UltraGauge+ can also measure multi-layered product (up to three layers), but various factors will affect measurement capability. Because of the many variables involved with measurement of a particular material, LaserLinc will require samples to evaluate and determine suitability of the product.

Transducer block with material running through the transducers.

Click to return to first page.

For more information about any of the products and features listed here, contact us via our website, email, or call us at 937•318•2440 or toll-free 888•707•4852.

Product types and wall thickness ranges measurable by the UltraGauge+

For more information about any of the products and features listed here, contact us via our website, email, or call us at 937•318•2440 or toll-free 888•707•4852.